Ceramic membrane filtration system
(Construction) TML Series Inorganic ceramic membrane filter system is
assembled and welded with elliptical head , Tank and support bottom as its body.
The Inside of the tank is welded by the upper bracket and down bracket
according to the customized size, and the ceramic membrane filter pipe is
installed between these two brackets. So there split 3 layers. The upper layer is
for oil gathering ; the middle layer is for filtering; the bottom layer is sediment
area. It sets liquid inlet and oil drain in the upper layer; There is a liquid outlet in
the middle layer and a sewage outlet in the bottom layer. There are valves
installed on each tube orifice to regulate water volume. Each layer set manholes
for installation and maintenance.
The Inorganic ceramic membrane filter tube is the core of the filter system.
The filter tube is made from rare earth and with ZrO2 as membrane material to form a stereoscopic
mesh structure, micro-porous membrane with the process of burning,crushing, grading,forming and film making.
The ceramic filter tube can endure acid assistance over 98%, alkali resistance over 82%, high temperature and
get high regenerative capacity. The filter system can deal with 160~360m3/h above water volume. Oil removal rate
reaches over 85%. The suspended solids is less than 1~30mg/L in the treated water.
Welcome to the萍鄉(xiāng)市普天高科實業(yè)有限公司website！
COMPANY PHILOSOPHY- Living by quality, development by credit
